Download  Print this page

Clutch Cable Installation; Clutch Cable Inspection And Lubrication - Kawasaki KX250F Service Manual

Hide thumbs

Advertisement

Clutch Lever and Cable
Free the cable from the cable holder [A].
Free the clutch inner cable tip [B] from the clutch release
lever [C].
Do not remove the clutch release shaft unless it is
absolutely necessary. If removed, release shaft oil
seal must be replaced with a new one.
W
Pull the clutch cable out of the frame.

Clutch Cable Installation

Run the clutch cable correctly (see Appendix chapter).
Adjust the clutch cable (see Clutch Lever Free Play Ad-
justment in Periodic Maintenance chapter).

Clutch Cable Inspection and Lubrication

During a periodic inspection or when the cable has been
removed, inspect and lubricate the cable (see General
Lubrication in the Periodic Maintenance chapter).
CAUTION
http://manuals.magnamaniac.com
ENGINE RIGHT SIDE 6-9

Advertisement

Table of Contents

   Also See for Kawasaki KX250F

Comments to this Manuals

Symbols: 0
Latest comments: