Table of Contents
Advertisement
o
o
o
o
o
o
Smart
Pots &
Normal
China
Fast
Turbo
Wash"
Pans
Wash
Gentle
Wash
Clean
I,
START
If your unit has a display
window
similar to the one shown
above,
follow
the instructions
below.
CANCELING
A CYCLE
.
Hold down the CANCEL button until the display
shows
"0:01".
Wait
for the end of cycle indicator.
.
Press "POWER"
button to turn the unit off. Then press
the "POWER"
button again
to turn the unit back on.
.
One of the cycle LEDs will flash. This indicates
that the
unit has been reset.
CHANGING
A CYCLE
If you need
to change
the running
cycle
to a new cycle:
.
Hold down the CANCEL button until the display
shows
"0:01"
.
Press POWER button to turn the unit off. Then press the
"POWER"
button again
to turn the unit back on
.
You can now select a new cycle.
Control
Lock
.
After
pressing
the "START" button you can activate
the
Control
Lock feature.
Press and hold down the "CHINA
GENTLE" button until
"CL" appears
in the display
window.
Now any button
you press (except
POWER) will not function and "CL"
will display
each time.
*
To deactivate,
press and hold the "CHINA
GENTLE"
button until the "C:L" disappears
from the display
window.
To enter
the options
mode:
(rinse aid setting,
dry assist)
.
Door must be closed.
Press the "POWER"
button to turn
the unit on.
.
The countdown
display
and one of the Wash Cycle LEDs
will be flashing.
.
Press and hold the "NORMAL
WASH"
button, then
press and release
the "START" button.
Now release
the
"NORMAL
WASH"
button.
.
The display
will show either "d:O0 - d:01"
or
"r:O0 - r :06".
You are now in the options setup mode.
.
Press "NORMAL
WASH"
to select the option
you would
like to adjust.
if the display
shows "d:O0"
or "d:01"
you can turn the Dry
Assist ON or OFF.
if the display
shows between
"r:O0"
to "r:06"
you can adjust
the amount of rinse agent dispensed.
15
To set the amount
of Rinse Aid:
NOTE: If your glasses have spots on them, you need more
rinse agent.
If your glasses have streaks, you need less
Rinse Agent.
Follow the instructions
to enter "options"
mode. With the
display
showing between
"r:O0"
- "r:06":
.
Press the "-" or "+"
button to change the amount of
rinse agent dispensed.
r:O0 --_ Rinse Agent OFF
r:03 --_ Medium
amount of rinse agent dispensed
r:06 --_ Highest amount of rinse agent
.
Press "START" to save.
Dry Assist
With this option you can raise the temperature
of the
rinse water
and increase the drying
time for improved
drying.
Follow the instructions
to enter "options"
mode. With the
display
showing "d:O0"
or "d:01":
Press the "-" or "+"
button to activate
or deactivate
dry
assist.
d:O0 --_ Dry Assist OFF
d:01
--_ Dry Assist ON
.
Press "START" to save.
Delay
Start
This option
allows
you to delay
the start
time
of your
cycle.
To select
this feature:
*
First
select
the desired
cycJe.
*
Then press
the "-" or "+"
button
until
you see the
desired
delay
time.
*
The cycle
will start
once
the displayed
time
elapses.
You could be seriously
scalded
if you allow
hot water
to splash out of the dishwasher.
OPEN THE DOOR
CAREFULLY during
any wash or rinse cycle. Do not fully
open the door until water
noises have stopped.
Hide quick links:
Advertisement
Table of Contents
