Getting Started - Kenmore ELITE 790-4501 Series Use And Care Manual

Slide-in induction range
Hide thumbs Also See for ELITE 790-4501 Series:
Table of Contents

Advertisement

Getting Started
Setting Clock at Power Up
You will be prompted
to enter the time of day in the event
of a power failure
or when you first provide
electric
power
to your appliance.
° When your appliance
is first powered
up, 12:00 wiii flash
in the display.
°
Enter the time of day using the numeric
key pads and
press START to set.
If an invalid time of day is entered,
the control will triple
beep. Re-enter a valid time of day and press START. If
STOP is pressed your clock will start with the time set for
12:00.
Select the CLOCK Q
key to modify
the time of day during
other situations
such
as day
light savings.
Setting
Timer
The timer provided
with the oven control serve as extra
reminders
in the kitchen. When the timer reaches less than 1
minute the display will start to count down in seconds. When
the time runs out the active timer will beep, and "End" will be
displayed.
The following
time settings apply to the timers:
° Min. time: 1 minute
° Max. time: 11 hours 59 minutes
See example
below to set the timer for 5 minutes:
1.
Press TIMER SET/OFF
2.
Enter 5 minutes
3.
Press START
To cancel
or end the timer, press the TIMER SET/OFF key
again.
NOTE: The timer(s) will not
affect
the cooking
process.
Preheat
Temperature
Display
Once a cooking
feature
has been started,
the control
wiii
display
the actual
oven temperature
while preheating.
Once
the oven reaches the oven set temperature,
only the oven set
temperature
will be displayed.
The preheat
temperature
display
is available
with the
following
cooking
modes:
*
Bake
° Conv Bake
Setting Oven
Lockout
The Oven Lockout feature automatically
locks the oven door
and prevents the oven from being turned on. It does not
disable
the dock,
Timer or the interior oven lights.
See example
below
to lock
the oven.
To lock, press and hold OVEN LOCKOUT
for 3 seconds.
To unlock, press and hold OVEN LOCKOUT
for 3 seconds.
DOOR LOCKED wiii flash in the display
until the door has
finished
locking.
Once the door has been locked the door
lock indicator wiii turn on. DOOR LOCKED wiii then stay
displayed.
Do not attempt
to open the oven door while the door lock
indicator is flashing.
To Set Add
1 Minute
Feature
The ADD 1 MINUTE
pad is
used
to set the Add 1 Minute
feature.
When the pad is pressed, 1 minute is added
to the
Timer feature
if this feature
is already
active.
If the Timer
feature
is not active and the pad is pressed, the Timer
feature
wiil become
active and wiil begin counting
down
from 1 minute.
For further
information
on how to set the
Timer feature
see Timer instructions
above.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents