Subscribe to Our Youtube Channel
Related Manuals for Solarc scottyPro
Summary of Contents for Solarc scottyPro
- Page 1 M a n u a l scottyPro the solar battery charger power supply LED for charging connection Solar module Clip Batteries Output port for Frontframe adaptercable Battery cover M a n u a l s c o t t y P r o...
- Page 2 "scottyPro" ? scottyPro beams the sun into the world of the electronic appliances: scottyPro can charge your batteries, mobile phones, PDAs, MP3 player etc. and to this he needs only the sunlight as an energy source. Mobile energy everywhere, independence pure and environmental friendly: with one scottyPro up to 100 AA Alkaline primary batteries can be saved every year! There are lots of accessories available, e.
- Page 3 The energy stored in the batteries can be transferred much faster into your device with the adapter cable as if the solar module was attached directly to the device. During the energy transfer to external devices scottyPro can off course be placed in the sunlight which even enlarges is efficiency.
- Page 4 (100 to 240 volt voltage). If you attach your device to scottyPro with the mains adapter (in several countries you need an adapter which is not part of scottyPro) at the same time you have a universal power supply unit for all devices which can be operated with scottyPro. Therefore you only...
- Page 5 The rear input jack is also used for connecting the optional booster solar module to scottyPro. It boosts the charging power by a factor 3 and thus reduces the charging time of the internal batteries by the same factor (compare table below).
- Page 6 0,5 – 1,5 hours 0,5 – 1 hours 12 minutes talk time Charging scottyPro (100%) with universal mains adapter: 8 - 10 hours with NiCd batteries 600 – 1.000 mAh, 12 - 16 hours with NiMH batteries 1.200 – 2.200 mAh.
- Page 7 • scottyPro can produce up to 13 volts at the adapter cable. Caution with small children and tongue tests therefore! M a n u a l s c o t t y P r o...
- Page 8 • scottyPro must remain dry if water has penetrated into the inside of the device. In this case remove batteries immediately and let scottyPro dry. • scottyPro doesn't like aggressive cleaning agents, don't spare on his solar module at all - just wipe off only with a soft, dry rag or with warm water.
- Page 9 Test Result scottyPro doesn’t get Remove batteries, attach adapter LED must illuminate charged cable, hold scottyPro under electric light bulb or in sunlight scottyPro gets charged Insert empty, well working batteries, LED must flash after plugging in an too slowly...
- Page 10 0,5% charging current (no effective charge!) / eye: bright Please send your scottyPro together with the adapter cable, adapters and batteries to your dealer or directly to SOLARC if it doesn't work after the described tests as indicated.
- Page 11 This also includes improper operation of scottyPro with external devices or an operation with external devices who are not listed in the device table.
Need help?
Do you have a question about the scottyPro and is the answer not in the manual?
Questions and answers