Auto Dry Cycle Modifiers
Use the Dryness Level Modifier to select dryness levels for the
Auto Dry Cycles. Press Dryness Level until the desired Dryness
Level setting illuminates.
The preset dryness setting is Normal when an Automatic Cycle is
selected. You can select a different dryness level, depending on
your load, by pressing Dryness Level and choosing More, Normal
or Less. Selecting More, Normal or Less automatically
adjusts
the dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
NOTE: Dryness Level selections cannot be used with the Timed
Cycles.
More
Dryness
Level
Timed
Cycle Modifiers
Use the Temperature
Modifier to select temperatures
for the
Timed Cycles.
Press Temperature
until the desired temperature
setting illuminates.
NOTE: Temperature modifiers cannot be used with the Auto Dry
Cycles.
High
Medium
low
Extlslow
Air Dry
Temperature
tabsr_ _u (,cus
Air Dry
Use the Air Dry Modifier for items that require drying without heat
such as rubber, plastic and heat-sensitive
fabrics. This table
shows examples of items that can be dried using Air Dry.
Type of Load
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - Shower curtains, tablecloths
20 - 30
Rubber-backed
rugs
40 - 50
Olefin, polypropylene,
sheer nylon
10 - 20
*Reset cycle to complete drying, if needed.
When using Air Dry
•
Check that coverings are securely stitched.
•
Shake and fluff pillows by hand periodically during the cycle.
•
Dry item completely.
Foam rubber pillows are slow to dry.
NOTE: Air Dry is not available with Auto Dry Cycles.
Page 21