Kenmore Elite Oasis 110.6703 Series Use & Care Manual page 14

Choose your exhaust installation type
Recommended exhaust installations
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.
A
/
B
................... D O
A. Dryer E. Clamps
B. Elbow E Rigid metal or flexible metal vent
C. Wall G. Vent length necessary to connect
D. Exhaust hood elbows
H. Exhaust outlet
Optional exhaust installations
Venting systems come in many varieties. Select the type best for
your installation.
Fire Hazard
Cover unused exhaust hole with the following kit:
8212563
Contact your local dealer.
Failure to follow these instructions can result in death,
fire, electrical shock, or serious injury.
This dryer can be converted to exhaust out the bottom. If you
prefer, you may contact your local dealer to have the dryer
converted. This dryer can also be exhausted from the rear to
either the right or left side. Optional kits for these exhaust
installations are needed, Refer to the manufacturer's instructions
for kit installation instructions.
B
A
A. Standard rear offset exhaust installation
B. Rear exhaust installation to left or right side
Z
C D
C. Bottom exhaust installation
D. Over-the-top installation (also available with one
offset elbow)
NOTE: The following kits for alternate installations are available
for purchase. For further information, please call
1-800-4-MY-HOME ®(1-800-469-4663).
• Rear exhaust installation to left or right side:
Part Number 8212504
• Bottom exhaust installation:
Part Number 8212503
• Over-the-Top installation:
Part Number 26-49900
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
14