Follow the progress of your dryer with the drying Status indicator
COOL D OWN @
WRINKLE GUARD @
CHECK LINT SCREEN@
The Wet light glows at the beginning of Auto Dry or Manual
cycles if a wet item is detected.
In an Auto Dry Cycle, if a wet item is not detected after
5 minutes, the dryer goes directly into Cool Down and the
Cool Down and WRINKLE GUARD_qndicators
In a Manual Cycle, if a wet item is not detected, the dryer will
continue to run for the length of time selected, but the Wet
light will not glow.
The Damp light glows in an Auto Dry Cycle when the laundry is
80% dry. Damp Dry Signal beeps, if selected. See
The Cool Down light glows during the cool down part of the
cycle. Laundry cools for ease in handling.
The Clothes Dry light glows when the drying cycle is finished.
This indicator stays on during WRINKLE GUARD ® .
WRIN KLE GUARD _
The WRINKLE GUARD _ light glows when this option is selected.
This indicator stays on with Clothes Dry.
Check Lint Screen
The Check Lint Screen light reminds you to check the lint screen.
The light glows when the user selects a cycle. It goes out when
the door is opened, Start is pressed, or after 5 minutes elapses.
The Control Locked light glows when this option is enabled.
Other indicator lights show Cycle, Options, Modifiers and End of
Cycle settings selected. The display shows the estimated or
actual time remaining.
cycle that matches
of load you are
Dry chart or Manual
* TOUCH UP
Auto Dry Cycles allow you to match the cycle to the load you are
drying. See the following Auto Dry Preset Cycle Settings chart.
Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and
adjusts the drying time for optimal drying.
Use this cycle to get high heat for heavy fabrics such as cotton
towels or bedspreads.
Use this cycle to get medium heat for drying large items that
require long drying times, such as jackets, comforters and
pillows. Rearrange the load when the Damp Dry Signal sounds.
This will aid in the drying process. The Damp Dry Signal is preset
to ON. See "Options."
Use this cycle to get medium high heat for drying denims.
Use this cycle to get medium heat for drying sturdy fabrics such
as work clothes.
Use this cycle to get low heat for drying no-iron fabrics, such as
sport shirts, casual business clothes and permanent press
Use this cycle to get extra-low heat to gently dry items such as
lingerie, blouses, or washable knit fabrics.