Advertisement
Home Screen Options
O
B
El
El n
Drum Light (1)
The drum light will come on whenever
the door is opened
to illuminate
the drum during
loading
and unloading.
Closing the door turns off: the light. The drum light will
automatically
turn off: if the door is left open more than 3
minutes.
You can activate
the drum light during
a cycle by pressing
light bulb icon O. The light will stay on during the cycle for
3 minutes. To turn it off:, press the icon again.
'_
Control Lockout, Press & Hold (2)
To lock the controls between
or during
cycles, press and
hold the _
Control Lockout icon for 5 seconds. Press the
large lock icon to unlock the controls when you are ready
to operate the washer. Use this feature to reduce the likeli-
hood of accidental
operation
by children.
Save MyCycle
(3)
Customize
and save your most used cycles with your pre-
ferred settings and options. Press _
Save for up to three
custom _
MyCycles.
The customized
cycle will be saved
to the active User. If you have populated
all three avail-
able _
MyCycles,
you will be asked which one you would
like to overwrite if you request to save another.
If you pause a _
MyCycle
and adjust options or settings,
i
the adjustments will not automatically
be saved. You
must press _
Save again to retain the adjustments.
Operating
Instructions
User (4)
Manage
users by pressing the User icon on the Home screen.
Up to three Users are available.
Within
the Manage
Users
screen you may clear Users, change
User icons, or delete
MyCycles within
a particular
user.
_" Preferences (5) - Guides
Enter the Preferences
screen by pressing the _
Prefs icon
on the Home screen.
On the Guides
tab you can: browse descriptions
of each
wash cycle; view details of cycle settings, options and
systems settings; and follow
directions
on how to manage
users.
O Preferences
(5) - System Settings
On the System Settings tab you can adjust the Chime set-
ting from Off: to Loud and adjust the display
brightness
for
ease of viewing
in your installation
setting. Using the lower
buttons you may: change
the interface
language;
run the
Install Cycle; reset the unit to factory
defaults;
or calibrate
the touch screen.
11
Advertisement
