Auto Cycles Preset Settings
Auto Cycles Load Type
Denim pants, jackets
Sheets, corduroys, sturdy
vary depending on load type and load size.
Use Timed Cycles to select a specific amount of drying time and
a drying temperature.
When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing More Time or Less Time. See "Changing
Cycles, Options and Modifiers."
Use this cycle to complete drying if items are still damp after an
Auto Cycle. Timed Dry is also useful for drying heavyweight
bulky items such as bedspreads and work clothes.
Use this cycle for drying small loads or loads that need a short
Use this cycle to help smooth out wrinkles from items such as
clothes packed in a suitcase or items wrinkled from being left in
the dryer too long.
Timed Cycles Preset Settings
Timed Cycles Load Type
Heavyweight, bulky items,
bedspreads, work clothes
Small loads, sturdy fabric
Helps to smooth out
Use Modifiers to select temperatures for the Timed Cycles only.
Press Temp Adjust until the desired temperature setting glows.
Temperature modifiers cannot be used with the Auto Cycles.
AOJUSTS T INTED CYCLES
Use the Air Only Modifier for items that require drying without
heat such as rubber, plastic and heat-sensitive fabrics. This table
shows examples of items that can be dried using Air Only.
Type of Load
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - Shower curtains, tablecloths
20 - 30
40 - 50
10 - 20
*Reset cycle to complete drying, if needed.
When using Air Only
Check to see that coverings are securely stitched.
Shake and fluff pillows by hand periodically during the cycle.
Dry item completely.
Foam rubber pillows are slow to dry.
NOTE: Air Only is not available with Auto Cycles.