User Manual; Mains Connection; Computer Operating Instructions - Skan ErgoMeter User Manual

User manual

Mains connection

The computer gets its power supply by the included
adaptor which will be connected to a normal mains
plug (European standard, please check the
specifications). If you have to buy a new adaptor it is
important to pay attention that it is GS-approved and
corresponds to the product safety law and the below
mentioned specifications.
The adaptor will be connected to the little plug in the
cover of the item near by the rear stabilizers.
Adaptor specifications:
Input: 230V~50Hz./0,1A max.
Output: 9V 1500mA 13.5VA
Don't use another electricity supply because this could cause damages or impairments of functions.
F
Please pay attention to the adaptor specifications on the type plate!

Computer operating instructions:

The multi-functional training computer has many operation modes and shows you all important
training data for your personal exercise surveillance.
It is very important to read all instructions completely in order to avoid faults and misunderstandings
and to exercise optimally with your new ergociser. Thank you!
The computer starts working by using the pedals or pressing a button.
The computer will switch on automatically when pedalling. After app. 4 minutes without any activity
the computer will also automatically switch off to save energy.
46