Switch The Device On And Off - Nokia N86 8MP User Manual

damage the card and the device and corrupt data
stored on the card.
Insert the memory card
A memory card may be already inserted in the device.
If not, do the following:
1. With the back of the device facing you, lift up the
cover.
2. Insert a compatible memory card in the slot. Ensure
that the contact area on the card is facing down and
towards the slot.
3. Push the card in. You
can hear a click when
the card locks into
place.
4. Close the back cover.
Ensure that the cover
is properly closed.
Remove the memory card
Important: Do not remove the memory card
during an operation when the card is being accessed.
Doing so may damage the memory card and the device,
and corrupt data stored on the card.
12
Cyan Cyan Cyan Cyan
1. Before you remove the card, press the power key,
and select Remove memory
are closed.
2. When Removing memory card will close all open
applications. Remove anyway?
select Yes.
3. When Remove memory card and press 'OK'
displayed, remove the back cover of the device.
4. Press the memory card to release it from the slot.
5. Pull out the memory card. If the device is switched
on, select OK.
6. Replace the back cover. Ensure that the cover is
properly closed.

Switch the device on and off

To switch on the device:
1. Press and hold the power key.
2. If the device asks for a PIN code or
lock code, enter it, and select OK.
The preset lock code is 12345. If
you forget the code and your
device is locked, your device will
require service and additional
charges may apply. For more
information, contact a Nokia Care
point or your device dealer.
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
card. All applications
is displayed,
is