Cisco 2600 Series Hardware Installation Manual page 93

Appendix B Maintaining the Router
Create directory filename [config]?
Created dir flash:/config
Router# mkdir flash:/config/test-config
Create directory filename [/config/test-config]?
Created dir flash:/config/test-config
Router# dir flash:
Directory of flash:/
3
3475
1
127832064 bytes total (104431616 bytes free)
Router# cd flash:/config
Router# dir flash:
Directory of flash:/config/
2
127832064 bytes total (104431616 bytes free)
Remove a Directory
To remove a directory from compact Flash memory, use the rmdir flash: command.
Before you can remove a directory, remove all files and subdirectories from the directory.
The following example shows output for displaying the contents of an internal compact Flash memory
card, then removing the subdirectory named
Router# dir flash:
Directory of flash:/config/
1581
128094208 bytes total (121626624 bytes free)
Router# rmdir flash:/config/test-config
Remove directory filename [/config/test-config]?
Delete flash:/config/test-config? [confirm]
Removed dir flash:/config/test-config
Router# dir flash:
Directory of flash:/config/
No files in directory
128094208 bytes total (121630720 bytes free)
Router#
Enter a Directory and Determine Which Directory You Are in
To enter a directory in compact Flash memory, use the cd flash: command.
To determine which directory you are in, use the pwd command.
If you enter only cd, the router will enter the default home directory, which is
The following example shows output for the following actions:
OL-2171-02
-rw- 14221136 May 07 1993 03:18:24 c2691-i-mz.122-7.6.T1
-rw- 9169616 Mar 01 1993 00:08:24 c2691-i-mz.tmp
drw- 0 Mar 01 1993 00:11:04
drw- 0 Mar 01 1993 00:11:20
drw- 0 Mar 01 1993 23:50:08
Installing and Formatting Compact Flash Memory Cards in Cisco 2691 Routers
config
test-config
:
test-config
test-config
Cisco 2600 Series Routers Hardware Installation Guide
.
flash:/
B-25