Nokia 3600 Slide Service Manual page 30

Page 2 –10
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-184
RJ-184 is a jig used for soldering and as a rework jig for McCoy
Microphones. It is used together with the ST-61 stencil.
RJ-215
RJ-215 is a jig used for soldering and as a rework jig for the engine
module. It is used together with the ST-66 stencil.
RJ-216
RJ-216 is a jig used for soldering and as a rework jig for the engine
module. It is used together with the ST-67 stencil.
RJ-230
RJ-230 is a jig used for soldering and as a rework jig for the engine
module.
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Service Devices and Service Concepts
SW security device
Rework jig
Rework jig
Rework jig
Common jig
RM-352; RM-354
Issue 1