Interface Specifications; Electrical Specifications - PaloAlto Networks PA-5000 Series Hardware Reference Manual

Hide thumbs Also See for PA-5000 Series:
Table of Contents

Advertisement

Interface Specifications

Interface Specifications
Table 9 lists the interfaces for the PA-5000 Series.
Table 9. Interface Specifications
Specification
Ethernet ports
SFP ports
SFP+ ports
Management ports
Management console port
High-availability (HA) port
USB ports

Electrical Specifications

Table 10 lists electrical specifications for the PA-5000 Series.
Table 10. Electrical Specifications
Specification
Maximum internal power dissipation
AC voltage
DC voltage
32 • Specifications
Description
12 RJ-45 10/100/1000 ports for network traffic.
Eight Small Form-Factor Pluggable (SFP) ports for network traffic.
PA-5060/PA-5050 only: Four 10 Gigabit Small Form-Factor Pluggable
(SFP+) ports for network traffic.
One RJ-45 port to access the device CLI through an Ethernet interface.
One RJ-45 port for connecting a serial console. Use these settings:
– Data rate: 9600
– Data bits: 8
– Parity: none
– Stop bits: 1
– Flow control: None
Two RJ-45 ports for high-availability control and synchronization.
Two USB ports for future use.
Description
450W.
100-240 VAC, 8-4A, 50-60 Hz.
-40 to -72 VDC, 15A.
Palo Alto Networks

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa-5060Pa-5050Pa-5020

Table of Contents