Panasonic CY-VRP112T1 Operating Instructions Manual page 33

Menu option
Driver Fatigue
Alert
LCD Setting
Voice Record
Beep
Speed Cam Alert
Automatic
Record
Record Interval
Motion Detection
32
Description
Calculates exposure
based on the entire image
area.
When enabled, the
camcorder sounds an
audible tone after an hour
of driving.
Set the duration for the
display to automatically
turn off right after video
recording starts.
Enable/Disable the voice
recording.
Enable/Disable the beep.
Warns the driver when the
vehicle is approaching a
speed camera.
Enable / Disable the
device to automatically
record video after the
device is turned on.
Set the recording duration
for each recorded video
file.
Enable/Disable the
motion detection. If this
function is enabled and
the power off button is
pressed, the system alert
message, "Press OK Key
to Power off, or enter
motion detection after
10sec.", will pop on the
screen. Under motion
detection mode, the
device will automatically
start recording when any
Available option
On / Off. Default: Off
On / Turn Off After 30
sec. / Turn Off After 3
min. / Off.
Default: On
On / Off.
Default: On
On / Off. Default: On
Voice Alert / Off.
Default: Voice Alert
On / Off.
Default: On
3 min. / 5 min.
Default: 3 min
On / Off.
Default: Off