Download  Print this page

Cylinder Head Installation; Cylinder Head Cleaning; Cylinder Head Warp Inspection - Kawasaki KX85 Service Manual

Hide thumbs
Also See for KX85
Brochure - 13 pages
Service manual - 233 pages
Owner's manual - 172 pages

Advertisement

Cylinder Head

Cylinder Head Installation

Replace the cylinder head gasket with a new one.
Check the head water jacket for a crust of minerals and
rust and remove them if necessary.
Install the dowel pins [A].
Install a new cylinder head gasket with the side marked
UP [B] facing up.
Tighten the cylinder head nuts to the specified torque in
a crisscross pattern.
Torque - Cylinder Head Nuts: 25 N·m (2.5 kgf·m, 18 ft·lb)
Install the removed parts (see appropriate chapters).

Cylinder Head Cleaning

Refer to the Cylinder Head Warp Inspection in the Peri-
odic Maintenance chapter.

Cylinder Head Warp Inspection

Refer to the Cylinder Head Warp Inspection in the Peri-
odic Maintenance chapter.
ENGINE TOP END 5-7

Advertisement

Table of Contents

   Also See for Kawasaki KX85

This manual is also suitable for:

Kx100Kx85-ii

Comments to this Manuals

Symbols: 0
Latest comments: