Download  Print this page

Water Pump; Water Pump Cover Removal; Water Pump Cover Installation; Impeller Removal - Kawasaki KX85 Service Manual

Hide thumbs
Also See for KX85
Brochure - 13 pages
Service manual - 233 pages
Owner's manual - 172 pages

Advertisement

Water Pump

Water Pump Cover Removal

Drain the coolant (see Coolant Draining).
Loosen the water hose clamp screws [A], and disconnect
the water hoses [B].
Remove the water pump cover bolts [C] and water pump
cover [D].

Water Pump Cover Installation

Replace the water pump cover gasket [A] with a new one.
Install the dowel pins [B] and water pump cover.
Tighten:
Torque - Water Pump Cover Bolts: 9.4 N·m (1.0 kgf·m, 83
in·lb)
Install the water hoses [A] so that the paint mark [B] faces
outside.
Tighten:
Torque - Water Hose Clamp Screws [C]: 3.0 N·m (0.31
kgf·m, 27 in·lb)

Impeller Removal

Remove the water pump cover (see Water Pump Cover
Removal).
Remove the impeller bolt [A] and take out the impeller [B]
and washer.

Impeller Installation

Install the washer [A] and impeller [B].
Tighten:
Torque - Water Pump Impeller Bolt: 8.3 N·m (0.85 kgf·m, 73
in·lb)
Install the water pump cover (see Water Pump Cover In-
stallation).
COOLING SYSTEM 4-9

Advertisement

Table of Contents

   Also See for Kawasaki KX85

This manual is also suitable for:

Kx100Kx85-ii

Comments to this Manuals

Symbols: 0
Latest comments: