The motorcycle is equipped with a
side stand switch. This switch is de-
signed so that the engine does not
start if the transmission is in gear and
the side stand is down.
Passenger's Seat Removal
Insert the ignition key into the seat
Remove the passenger's seat up-
ward while turning the key clockwise.
A. Ignition Key
B. Seat Lock
C. Passenger's Seat
Passenger's Seat Installation
Insert the tab on the rear of the pas-
senger's seat into the slot in the
Insert the projections at the front of
the passenger's seat into the holes
on the frame.
Push down the front part of the pas-
senger's seat until the lock clicks.