Download  Print this page

Advertisement

hold it in until the average mileage
values resets to "– –. –".
NOTE
The data is maintained by backup
power if the ignition switch is turned
off.
When the battery is disconnected,
the average mileage resets to "– –.–".
After resetting the average mileage,
the numerical value is not displayed
until 5 mL (0.2 US oz.) of fuel has
been used and 100 m (328 ft) has
been traveled.
Clock
To adjust hours and minutes, do the
followings while the motorcycle is at a
stop.
Turn the ignition switch on.
Push the MODE button to select the
clock.
GENERAL INFORMATION
Push the RESET button for more
than 2 seconds. Both the hour and
minute displays start blinking.
Push the RESET button. The hour
display only blinks. Push the MODE
button to advance the hours.
Push the RESET button. The hour
display stops blinking and the minute
display starts blinking.
MODE button to advance the min-
utes.
49
Push the

Advertisement

Table of Contents

This manual is also suitable for:

Ninja zx-6r abs

Comments to this Manuals

Symbols: 0
Latest comments: