When the ignition switch is turned
on, all LCD segments are displayed
with opening display functions for few
seconds, then the multifunction meter
turns to operational mode.
The speedometer shows the speed
of the vehicle in digital values.
The unit setting in the multifunction
meter can be changed according to lo-
cal regulations. Make sure the unit set-
ting is correctly displayed before riding.
A. Meter Display Unit
Do not operate the motorcycle with
wrong unit (mph or km/h) of the
To change the meter display units in
the multifunction meter as follows:
Display the odometer in the multi-
Push the RESET button while push-
ing the MODE button to select the