Connect the capped cable to the (+)
terminal, and then connect the black
cable to the (–) terminal.
Install the battery in the reverse order
of the Battery Removal.
Installing the (–) cable to the (+)
terminal of the battery or the (+)
cable to the (–) terminal of the
battery can seriously damage
the electrical system.
Put a light coat of grease on the ter-
minals to prevent corrosion.
MAINTENANCE AND ADJUSTMENT
Cover the (+) terminal with its protec-
Reinstall the parts removed.
Headlight aiming should be done by
an authorized Kawasaki dearer.
The headlight beam is adjustable
horizontally. If not properly adjusted
horizontally, the beam will point to one
side rather than straight ahead.
Turn the horizontal adjuster in or out
until the beam points straight ahead.