Download  Print this page

Advertisement

134
MAINTENANCE AND ADJUSTMENT
WARNING
Misalignment of the wheel will
result in abnormal wear, and may
result in an unsafe riding con-
dition. Align the rear wheel us-
ing the marks on the swingarm
or measuring the distance be-
tween the center of the axle and
swingarm pivot.
Tighten both chain adjuster locknuts.
Tighten the axle nut to the specified
torque.
Tightening Torque
Axle Nut: 127 N·m (13.0 kgf·m, 94 ft·lb)
NOTE
If a torque wrench is not available,
this item should be serviced by an
authorized Kawasaki dealer.
Rotate the wheel, measure the chain
slack again at the tightest position,
and readjust if necessary.
Install a new cotter pin through the
axle nut and axle, and spread its
ends.
A. Cotter Pin
NOTE
When inserting the cotter pin, if the
slots in the nut do not align with
the cotter pin hole in the axle shaft,

Advertisement

Table of Contents

This manual is also suitable for:

Ninja zx-6r abs

Comments to this Manuals

Symbols: 0
Latest comments: