Advertisement
to take your juicer apart
1 Remove the pulp collector by tilting
and sliding out.
2 Unlatch the lid and lift off.
3 Remove the filter and filter holder
together. Then separate for cleaning.
care and cleaning
Before cleaning, unplug your juicer.
G
If the filter is too tight to remove, wait
G
a few minutes until it loosens up.
Some foods, eg carrot, will discolour
G
the plastic. Rubbing with a cloth
dipped in vegetable oil helps remove
discolouring.
motor unit
Wipe with a damp cloth, then dry.
G
Do not immerse in water.
G
Store excess cord in the storage
G
area at the back of the power
unit
.
filter
Clean using a soft brush.
G
Check the filter regularly for
G
signs of damage. Do not use if
the filter is damaged. Refer to
"service and customer care"
other parts
Wash in hot soapy water, then dry.
G
Alternatively they are dishwasher
G
safe and can be washed on the top
rack of your dishwasher. Avoid
placing items on the bottom rack
directly over the heating element. A
short low temperature (Maximum
50°C) programme is recommended.
service and customer
care
If the cord is damaged it must, for
G
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you experience any
G
problems with the operation
of your juicer, before calling
for assistance refer to the
troubleshooting guide.
If you need help with:
using your juicer or
G
servicing or repairs (in or out of
G
guarantee)
UK only
call Kenwood customer care on
023 9239 2333. Have your
model number ready (ie
JE680) and date code (5 digit
code ie 10D13) ready. They are
on the underside of your power unit.
spares and attachments
G
call 0844 557 3653.
other countries
Contact the shop where you bought
G
your juicer.
Designed and engineered by
G
Kenwood in the UK.
Made in China.
G
5
Advertisement
