SUPPLEMENT FOR 1980 M O D E L 305
ADDITIONAL CONSIDERATIONS FOR
RACING (on US Model)
jet needle on the carburetor o f US model has only
one groove in which the clip i s set. So a richer mixture
cannot be made by changing the position o f the needle.
Refer to Pgs. 244- 247, adding the following:
1. For the motorcycle with the rear drum brake, the
necessary to install the ball bearing
o f the rear wheel coupling.
A. Driver (57001-1 091
4. For KZ550-C, the bead breaker assy i s necessary t o
remove the tubeless tire.
A. Bearing Driver (57001-296)
the air pressure gauge is necessary to
_ - -
check the front fork air pressure.
A. Bead Breaker Assy (57001-1072)
B. Tire Irons (57001-1073)
Table N33 shows
locations o f the wiring diagrams
for the variation models.
A. Air Pressure Gauge (52005-1003)
3. KZ550-C, the driver is necessary t o remove and install
the front fork oil seal.
Same as KZ500-B1 (Pg. 248)
See Pg. 306.
Same as KZSOO-61 (Pg. 248)
See Pg. 307.
See Pg. 308.