To Disable A Jetdirect Embedded Print Server (V34.Xx) - HP Jetdirect J7974E Administrator's Manual

To Disable a Jetdirect Embedded Print Server (V34.xx)

In most printers/MFPs that support an HP Jetdirect embedded print server, you can disable the print
server using the printer/MFP Service menu. This feature can help to isolate faults to either the printer
or the print server.
1. Turn the printer on and watch for the memory count to begin.
2.
Press and hold the Select
the three control panel lights (Ready, Data, Attention) blink and then remain on.
3.
Release the Select
4.
Press the down arrow
5.
Press the Select
continue its power-on sequence.
6. Verify whether the printer/MFP properly completes its power-on sequence.
To enable the embedded print server, use the same instructions except select Embedded LAN
enable in step 4 above.
ENWW

button (or the "6" button on MFPs with numeric keypads only) until

button (or "6" button). The control panel will display Select Language.
M
button (or "9" button) until Embedded LAN disable appears.

button (or "6" button) to perform disable the embedded print server and then
To Disable a Jetdirect Embedded Print Server (V34.xx) 111