Using Other Equipment With Your Tv Remote Control; All Equipment; Operating A Vcr; Operating A Satellite Receiver - Sony KV-30XBR910 Service Manual

Using Other Equipment with Your TV Remote Control

All Equipment

Operating a VCR

Operating a
Satellite Receiver
58
To Do This ...
Switch the TV's input to the
VCR, DVD player, or other
connected equipment
Set up the TV remote control to
operate non-Sony equipment
To Do This ...
Activate the remote control
to operate the VCR
Change channels
Record
Play
Stop
Fast forward
Rewind the tape
Pause
Search the picture forward
or backward
Change input mode
To Do This ...
Activate the remote control
to operate the satellite
receiver
Turn on/off
Select a channel
Change channels
Back to previous channel
Display channel number
Display SAT Guide
Display SAT Menu
Move highlight (cursor)
Select item
Do This ...
Press TV/VIDEO repeatedly to cycle
through the video equipment connected
to the TV's video inputs.
You must program the remote control the
first time you use it. See "Programming
the Remote Control" on pages 47 to 48.
Press
Open the outside cover, as shown on page 46.
Then set the A/V slide switch to the position
you programmed for the VCR.
CH +/-
N and z simultaneously
N
x
M
m
X
M or m during playback
(release to resume normal playback)
TV/VCR
Press
SAT/CABLE FUNCTION
SAT/CABLE POWER
0-9, ENTER
CH +/-
JUMP
DISPLAY
GUIDE
MENU
V v B b
Move the joystick