Immobilizer System (Equipped Models)
Connect the key registration unit [A].
Special Tool - Key Registration Unit: 57001-1582
Insert the master key to the ignition switch and turn it ON.
The FI indicator light [A] blinks to display the registration
mode (go to the next step).
The FI indicator light [A] blinks to display the collation error
(refer to the following failure illustrations).
Immobilizer Amplifier Failure
Master Key Collation Error
Turn the master key OFF and remove the master key.
The FI indicator light [A] blinks continuously to display that
the ECU is in the registration mode for 15 seconds.
Insert next key and turn ON within 15 seconds after pre-
vious key is turned off and removed otherwise registra-
tion mode will be ended and the FI indicator light stops
To return to the registration mode start the master key
verification procedure. This applies to all user key reg-
ELECTRICAL SYSTEM 16-75