Replace the clutch hub nut with a new one.
Holding the sub clutch hub, tighten the clutch hub nut.
Special Tool - Clutch Holder: 57001-1243
Torque - Clutch Hub Nut: 135 N·m (14 kgf·m, 100 ft·lb)
Install the friction plates and steel plates, starting with a
friction plate and alternating them.
If new dry friction plates and steel plates are in-
stalled, apply engine oil to the surfaces of each
plate to avoid clutch plate seizure.
Install the last friction plate [A] fitting the tangs in the
grooves in the housing as shown.
Apply molybdenum disulfide grease to the pusher ends
[A] and install the shim [B], bearing [C], pusher [D] in the
clutch spring plate [E].
Align the grooves [A] of the spring plate [B] to the grooves
[C] of the sub clutch hub [D] to install the spring plate on
the sub clutch hub.
Install the springs and spring holders, and tighten the
clutch spring bolts.
Torque - Clutch Spring Bolts: 8.8 N·m (0.90 kgf·m, 78 in·lb)
Install the clutch cover (see Clutch Cover Installation in