3-106 FUEL SYSTEM (DFI)
Throttle Body Assy
Throttle Body Assy Installation
Install the holder clamp bolts [A] in the direction as shown.
Bolt Heads [B]
Install the lower ends of the throttle cables in the throttle
body assy, and install the throttle body assy.
When installing the throttle body assy, put the main
throttle valves in the throttle bore, be careful to
damage to valves.
Torque - Throttle Body Assembly Holder Clamp Bolts: 3.0
N·m (0.30 kgf·m, 27 in·lb)
Install the removed connectors.
Run the vacuum hoses as shown in the Cable, Wire, and
Hose Routing section in the Appendix chapter.
When installing the fuel hose, refer to Fuel Tank Installa-
tion in this chapter.
Throttle Grip Free Play (see Throttle Control System In-
spection in the Periodic Maintenance chapter)
Idle Speed (see Idle Speed Adjustment in the Periodic
Throttle Body Assy Disassembly
1. Subthrottle Valve Actuator
2. Subthrottle Valve Sensor
3. Main Throttle Valve Sensor
4. Throttle Body Assy
6. Delivery Pipe Assy