Column Installation - Haier HDY-D70-E Service Manual

Condenser tumber dryer
Hide thumbs Also See for HDY-D70-E:
Table of Contents

Advertisement

Condenser Tumber Dryer

Column Installation

To save space, the dryer may be installed
on a prepositioned drum washing machine
using a folding frame. This dryer can be
placed with the HBF series washers by a
folding frame. For specific installation, refer
to the instructions for the installation of the
folding frame.
Change the door-opening direction
If the direction of opening the dryer's door is
not suitable to the location, its opening direction
may be changed. The detailed operating
procedures are as follows:
Screw off the 4 screws(1) fixing the door's
hinge to remove the door(5);
Remove the hinge(3) from the door and
take off the hinge cover(4) at the other side
and fix the hinge back;
Screw off the screws fixing the door
switch(6) to remove the door switch. Take
off the door switch cover(7) at the other
side and fix the door switch back;
Put the removed hinge cover(4) and
door switch cover(7) into the side opposite
to the door;
Remove the 4 corks and the door lock
cover from the front panel and put them on the other side of the
front panel;
Fix the door on the other side of the machine.
Drain switchover
During the drying of the laundry, the condensate water is automatically
collected in the box inside the machine, so that the water needs to
HDY-D70-E/-F
2
6
1
3
4
1
2
5
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdy-d70-f

Table of Contents