STEP 1: Mount cover and secure
"
with 2 screws.
STEP 2: Attach the handle and se-
"
cure with 4 screws.
STEP 3: Attach detergent suction
"
tube to the detergent dosing valve.
6
English
ASSEMBLY INSTRUCTIONS
STEP 4: Place detergent tank into
"
compartment.
STEP 5: Attach the high pressure
"
hose to the trigger gun.
Pull out the locking slide from the
right side of the trigger gun handle
(A), and insert the small end of the
high pressure hose into place (B).
Push the locking slide back into the
trigger gun (C) to lock the hose in po-
sition (D).
A
C
B
"clic"
D