Gfci Instructions; Using The Accessories; Ground Fault Circuit Interrupter (Gfci) - Kärcher K 3.97 M Operator's Manual

OPERATING INSTRUCTIONS – continued
High pressure
pencil jet
cleaning
Step 5 Step 5 Step 5
Step 5 Step 5
Turn Quattro Nozzle to desired setting position. Match symbols above.
6
Step 6 Step 6 Step 6 Step 6 Step 6
Turn on the pressure washer. The
motor starts only if the trigger of the gun is
pulled and shuts off when the trigger is
released.

GFCI INSTRUCTIONS

Step 1 Step 1
Step 1 Step 1 Step 1
Plug the Ground
Fault Circuit Interrupter
(GFCI) into a working outlet.
High pressure Rotating jet for
fan jet cleaning maximum dirt
cutting action
Step 2 Step 2
Step 2 Step 2 Step 2
If the GFCI light
glows, press the "Test"
button until the light goes
out.
WARNING
RISK OF INJECTION OR INJURY-DO
NOT DIRECT DISCHARGE STREAM AT
PERSONS.
TO AVOID SERIOUS INJURY, NEVER
POINT SPRAY NOZZLE AT YOURSELF,
OTHER PERSONS OR ANIMALS.
Step 3 Step 3
Step 3 Step 3 Step 3
"Reset" button to restore
power to the washer.
Low pressure
fan jet for
detergent
injection
Press the