Table of Contents
Advertisement
Safety system of the NAZCA II
It is imperative that you know the correct operation and assembly of your safety system before using it.
Always check your safety system before each use to make sure that it functions correctly.
Main quickrelease
1.
The depower line is fixed to the quick release system with an elastic cord. WARNING : the
elastic cord of the sleeve must not be twisted around the depower line; it must be parallel to
the depower line.
2.
Pass the rigid webbing of the quickrelease through the metal rectangle, towards you.
3.
Fold the webbing down while pushing up the solid sleeve.
4.
Lock the quickrelease by pulling the solid sleeve down against the chicken loop.
5.
To release : push the quickrelease sleeve away from you, in the direction of the red arrow on
the sleeve. You will still be connected to the kite by the 5
www.ginkites.com
th
line.
15
Advertisement
Table of Contents
