Operating Instructions - Kärcher HD 2700 DB Operator's Manual

OPERATING INSTRUCTIONS

NOTE: Engines controls shown may appear different.
Step 1
Check oil level. Oil level should be level
with the bottom of the oil filler neck. Be sure the
machine is level when checking the oil level. (Refer to
the engine's operating manual for seasonal grades.)
We recommend that the oil be changed after the first
5 hours of use, then once every 50 hours.
Note: Improper oil levels will cause low oil sensor to
shut off engine.
Step 4
Trigger the gun
to eliminate trapped air, wait
for a steady flow of water to
emerge from the spray
nozzle.
Step 7
Turn the engine
switch to the "ON" position.
NOTE: HD 3500 DB has a
has a toggle switch. Press to
"ON" position.
Step 5
Slide the choke
lever to the left to the closed
position (on a warm engine,
leave the choke lever in the
open position).
Step 8
Pull the starter
handle. If the engine fails to
start after 3 pulls, squeeze
the trigger gun to release
pressure, and repeat step.
After the engine is warm and
running smoothly, slide the
choke lever to the right (open)
and throttle to the left (fast).
Step 2 Step 3
Fill gas tank Connect garden
with unleaded hose to the cold
gasoline. water source
Do not use and turn water
leaded gasoline. on completely.
Never use hot
water.
Step 6
fuel valve to the on position.
Slide the throttle lever toward
the fast position.
NOTE: HD 2700 DB has a
ON/OFF knob. Turn fuel knob
to "ON" position.
Step 9
control to desired setting.
4
Slide or turn the
Adjust pressure