● Installation of the transducer or water temperature sensor inside the hull
with adhesive should be done while you ventilate well inside the boat.
Volatile gas from solvent or etc. causes to toxic symptoms.
● When you work using electric tools, please keep your hands dry.
If you hands are wet, it causes to electric shock.
● When you pull out or insert the plug of transducer or water temperature
sensor, please be sure to turn the power switch off.
It causes to electric shock.
Perfect waterproof treatment should be done when you install the
●
transducer or water temperature sensor through the hull.
If waterproof is not sufficient, it causes to marine disaster because water
comes in.
※Please ask to shop for installation.
3