Honda HE-1500 Operation Manual page 36

<HE-1500>
Procedure of installing main unit
＜Installation of main unit＞
1．＜Decision of place you install＞
While the bracket is mounted with unit, you decide the place you install and put the mark.
※Keep enough space behind the unit to connect with cables.
2．＜Installation of bracket＞
Install the bracket with supplied screws into eight outside holes.
3．＜Installation of unit＞
Install the unit referring to the below figure.
1). Fix the Fitting Metal by Hexagon bolt to the unit, then screw the Clamping knobs
with washers to the both side of the unit loosely.
2). Put the unit to slit of the bracket. with fitting the gap of the clamping knob.
3). Screw other 2 clamping knobs thru the bracket and the fitting metal.
Fitting
Metal
Hexagon Bolt
M8 x 12
32
Clamping Knob
with Washer
Bracket