Basic Programming; Dkt Programming - LG-Nortel ARIA SOHO Hardware Description And Installation Manual

ARIA SOHO Hardware Description and Installation Manual
STARTING THE ARIA SOHO

6.2 Basic Programming

The ARIA SOHO System can be programmed to meet an individual customer's needs. There are two ways to perform
Admin Programming:
PC Admin – Refer to PC Admin Programming Manual
DKT – In this manual, DKT (Station 100) Admin Programming is described.

6.2.1 DKT Programming

All programming is done at Station 100 (Station Port #00) using the LDP-7224D Digital Key Telephone.
Additional programming stations may be assigned (113 - FLEX1), but only DKT can be active in the programming
mode at any one time.
When in programming mode, Station 100 does not operate as a normal telephone, but instead works as a
programming instrument with all of the buttons redefined. The keys of the dial pad are used to enter the various data
fields to enter numerical information:
Flexible Buttons – The 24 buttons located at the right side of the phone are used to indicate a
specific data field and to enter information.
Speed Button and * Key – Are sometimes used to delete data, or to indicate the end of data
input.
Redial Button – Could be used to delete one digit or character from the end of entered data or
characters.
6.2.1.1 Button Explanation
Figure 6.2.1.1 describes the buttons and function keys (refer to the LDP-7224D User Guide for detailed information
and operation instructions).
FIGURE 6.2.1.1 DESCRIPTION OF LDP-7224D BUTTONS
53
Issue 1
Aug, 2006