Board Installation; Installation Of The Boards - LG-Nortel ARIA SOHO Hardware Description And Installation Manual

ARIA SOHO Hardware Description and Installation Manual

BOARD INSTALLATION

4.1 Installation of the Boards

Prior to installing the Boards, the following should be considered:
CAUTION
Power must be turned OFF.
To protect the System from static electricity, do not touch the boards. To discharge static, touch a
grounded object, or wear a grounding strap.
Insert boards carefully to avoid bending connector pins (male pins on MBU/EMBU) and board
damage from power shortage caused by misaligning.
For hybrid port on MBU/EMBU/CHB308, DKT and SLT do not support at the same time. DKT
has a priority.
To install the Board, perform the following Steps:
1. Before inserting the Board, remove the dummy slot as shown in #1 of Figure 4.1.
2. Holding the board as shown in #2 of the diagram, carefully insert the Board in the direction of the
arrow so that the Board securely engages with the connector (CN2) on the main board (#3).
FIGURE 4.1 BOARD INSTALLATION
25
4 B I
B
O A R D
O A R D
Issue 1
Aug, 2006
I
N S T A L L A T
N S T A L L A T
I O N
I O N