Table of Contents
Advertisement
10. SPECIFICATIONS
Display feature
10-inch color CRT screen (vertical setup type)
Color gradation
16 levels (Display color: 4 types, Background color: 4 types)
All colors are user-selectable.
Shift
0-1500 m, 1m steps ("m", "FT", FM", "SP")
Range
Manual Panel key setting/12 preset ranges (usually, every 5 to 2,000 m),
STEP mode
Auto ON/OFF
Depth unit
Either meters, feet, fathoms, or any value (0.3 - 1.9 m) can be
selected.
Display modes
Rotary switch, graph panel key, and A-scope
STD.
STD. display area: 100%
STD/STD.
Dual-frequency split display (vertical or horizontal) 50%:50% STD.
display.
STD./ZOOM
ZOOM display (vertical) approx. 60%:36%, (vertical) approx.
50%:50% (vertical splitting also available).
DUAL/ZOOM
DUAL display, ZOOM display (vertical) approx. 64%:36% (vertical), or
either 50%:50% or 100% is menu-selectable.
MIX
Three vertically split displays
A-SCOPE
A-scope display in all display modes:
GRAPH
Graph display in all display modes (optional sensors are required)
Cursor
Variable range marker with depth scale: Only one digit displayed for a
water depth less than 100 m.
Water depth scale
Displayed linearly and digitally at the right end of the screen or in the
middle.
bottom depth
Displayed digitally at the bottom left of the screen.
Alarm functions
FISH ALARM
Can be set in the range of 2000 m ("m", "FT" or "FM") from the zero line.
TEMP. ALARM
2
Can be set in the range from -10 to + 50 deg C.
Color sample
Time mark
Interference suppression Manual/Auto
Draft adjustment
Chart speed
Marker
Backup
Brightness
Panel lighting
GAIN
STC (Debubbling)
CLUTTER
(Noise suppression)
Color suppression
Frequencies
Output Power
FM transmission
Output reduction
control
TX pulse width
1
TX cycle
Water depth data
output
CUSTOM functions
Water temp. input
Power requirements 12, 24, 32VDC
Outline dimensions
Mass
Operating temperature
Displayed at the left end of the screen (ON/OFF).
30-sec (On for 15 sec, Off for 15 sec)
Menu type, in steps of 0.1 from 0 to 20m
1/1, 1/2,
1/9, OFF
Vertical line
EEPROM
Control (also, functions as power control)
Fixed
Variable Resister
Menu-selectable curve, semi-fixed control of intensity
Variable Resister
Menu-selectable
200, 75, 50, 38, 28kHz
3kW
200kHz
Built-in
0.2-3.0 m/sec, range-synchronous, long/short selectable
300 pulses/min (0-40 m)
JRC and NMEA0183 formats
3 types
JRC and NMEA0183 format sensors
295 mm (W) x 324 mm (H) x 372 mm (D)
16o
15
~ 55
73
Advertisement
Table of Contents
