Table of Contents
Advertisement
4.1 Display Installation
Installation procedure
Use the following procedure to install the display:
(1) Loosen the two unit-lock bolts at the front bottom of the unit and remove the mounting plate.
(2) Provide four 6mm-diameter tapping screw holes in the installation location for the unit.
(3) Set up the mounting plate securely on a desk or table using the supplied tapping screws.
(4) Fix the unit to the mounting plate using the bolts that were removed in step (1) above.
Refer to the installation manual for further details.
M6 tapping screw
Maintenance space
Maintenance space
Maintenance space
Unit: mm
4. INSTALLATION 63
Advertisement
Table of Contents
