Download Print this page


Consign any electrical work on this unit to your
JRC product dealer, the JRC sales or service
representative in your area, or the Sales
Department of JRC. Electrical work by persons
other than qualified service engineers is
dangerous and may cause malfunction.
Do not install this unit in places where its
screen is exposed to direct sunlight for a long
time or where the ambient temperature
oversteps the range from -10 to +55 degrees C.
Otherwise, fire and/or unit trouble may result.
Do not place this unit on an unstable table or
desk or in an inclined place. If the unit drops or
falls, personal injury may result.
Do not abruptly move this unit from a cold place
to a hot one. Condensation may cause high-
pressure leakage, resulting in trouble. If this is
the case, allow the unit to stand in the air for at
least about 30 minutes before operating it.
When installing this unit, connect the grounding
wire to the grounding terminal properly. If unit
trouble or current leakage occurs, electrical
shock may result.
Do not expose this unit to water. When
disconnecting the cable connectors from the
rear panel, be particularly careful so as to avoid
contact with water. Otherwise, electrical shock
or unit trouble may result.


   Also See for JRC JFV-700HP

   Related Manuals for JRC JFV-700HP

Comments to this Manuals

Symbols: 0
Latest comments: