Download Print this page

Advertisement

Specifying the vertical range (axis) for the
water temperature graph
The procedure for specifying the median value
value
for the graph is as follows:
Display the main menu by pressing the
Move control to "GRAPH" by pressing the
then move control to the GRAPH SETTING submenu by pressing
the
key.
Move control to "TEMP."
Specify the median value (for example, 15 deg C) for the graph by
pressing the
or
Move control to "TEMP."
Specify the width (for example, 20 deg C) for the graph by
pressing the
or
Press the
key to return to the main menu.
MARK
Press the
key to return to the fishfinding display.
GRAPH
An optional water temperature sensor must be connected to display
water temperature. See page 59 for the water temperature input
procedure.
Refer to the installation manual for further details.
Changing the display time
Data sampling (acquisition) time for display can be specified for each
type of graph. The setting range is from one to three hours.
Even when no graphs are displayed, water depth/water temperature
data is stored automatically. When a graph is displayed, therefore,
the specified display time will be immediately displayed on that
graph.
The display time can be changed using this procedure:
Display the main menu by pressing the
Move control to "GRAPH" by pressing the
then move control to the GRAPH SETTING submenu by pressing
the
key.
Move control to "TIME" by pressing the
Enter the desired display time by pressing the
Press the
key to return to the main menu.
MARK
Press the
key to return to the fishfinding display.
GRAPH
and
by pressing the
key.
by pressing the
key.
and
or
and the width
keys together.
or
key, and
GRAPH
SETTING
or
key.
or
key.
Main menu
keys together.
or
key, and
key.
or
key.
GRAPH SETTING
Water temperature
range setting
GRAPH
Display time setting
3.OPERATIONS 35

Advertisement

   Also See for JRC JFV-700HP

   Related Manuals for JRC JFV-700HP

Comments to this Manuals

Symbols: 0
Latest comments: