Setting Clean With Start Time; Clean - Frigidaire Electric Ranges Use & Care Manual

Electric
Hide thumbs Also See for Electric Ranges:
Table of Contents

Advertisement

Setting clean with start time

You may add start time instructions to the clean feature,
which will automatically start clean at a later time.
IMPORTANT
Immediately after setting clean using start time
instructions the oven door will start to lock. Check
to be sure the oven is completely empty before setting
clean with start time. Be aware that the clean feature
will not start heating the oven for cleaning until the time
of day reaches the set starting time
If clean was set and any items remain inside the oven,
you will need to remove them before clean begins the
heating portion of the cycle.
Press clear off to cancel and wait for the oven door to
unlock. Once unlocked, remove any items from the
oven, close the oven door and set for clean again.
To set clean with delay start instructions:
1. Remove all items from the oven, cooktop, and all oven
racks from the oven and be sure the oven door is
completely closed. Be sure the oven control displays the
correct time of day and adjust if needed.
2. Press the start time keypad. The ":" in the time of day
display will flash.
3. Press and hold the
start a delayed clean cycle. Release the keypad when
the desired start time is displayed.
4. Press the clean keypad. "---" appears in the display.
5. To start press the
appear in the display indicating that a 3 hour self-clean
time is set. To change to a shorter 2 hour self-clean
time press the
keypad once ("2:00" will appear in
the display indicating a 2 hour clean time is desired).
6. "CLn" will appear in the oven display during the clean
cycle and the "door locked" indicator light will remain
ON until the cleaning cycle is complete or cancelled and
the oven temperature has cooled.
To stop clean at any time press clear off keypad.
keypad to scroll to the time to
or
keypad once. "3:00" will
CAUTION
To avoid possible burns use care when opening the oven
door after the clean cycle is finished. Stand to the side
of the oven when opening the oven door to allow any
hot air or steam to escape.
When the self-clean cycle is finished:
1. The time of day will appear in the oven display and the
"clean" and "door locked" indicator lights will continue
to glow.
2. Once the oven has cooled down for about 1 hour and
the "door locked" light has turned off, the oven door
may be opened.
3. Wait until the oven is completely cool, then wipe
away any residue or powdered ash from the oven
interior using a clean damp cloth or paper towel.
NOTES
• The maximum start start setting with the clean
feature is 11 hours & 59 minutes.
• Check to be sure the oven is empty before setting a
clean cycle using a start time setting. Immediately after
setting clean with a start time the oven door will lock.
On models equipped with cooktop lockout the cooktop
will also lock. The clean feature will not start heating
the oven for cleaning until reaching the delay start time.

CLEAN

23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents