Checking The Region Settings Selection - Toshiba TOSVERT VF-MB1 Instruction Manual

4.4

Checking the region settings selection

 : Checking the region setting
 Function
The region selected on the setup menu can be checked.
Also, the setup menu can be started to change to a different region.
[Parameter setting]
Title
Checking the region setting

* Default setting values vary depending on the setup menu setting. 1 to 4 are displayed.
 Content of region settings
The number displayed when parameter  is read indicates which of the following regions was selected on
the setup menu.
:  (Europe) is selected on the setup menu.
:  (Asia, Oceania) is selected on the setup menu.
:  (North America) is selected on the setup menu.
:  (Japan) is selected on the setup menu.
The setup menu is started by writing =.
Refer to section 3.1 for details.
Note:  to  set to parameter  are read-only. Be aware that they cannot be written.
Function
0: Start setup menu
1: Japan (read only)
2: North America (read only)
3: Asia (read only)
4: Europe (read only)
D-13
Adjustment range
E6581697
Default setting

4