Liebert CBH 017 Service Manual page 19

Fig. 2 --- Lifting instructions with tubes
N.B: Place the lifting tubes in the holes in the base indicated by the words "LIFT HERE". Lock the ends of the tubes in position with
the locking pins and split pins as shown above. The capacity of the lifting gear must be adequate to lift the load in question.
Check the weight of the unit, the capacity of the lifting gear and ropes and the condition and suitability of the aforementioned
equipment. Lift the unit with a speed suitable for the load to be moved, so as not to damage the structure.
PROTECTION PLANK
RIGID STRUTS
(POSSIBILY STEEL)
Lifting
Models
CBH / CLH 017 ---020 ---023 ---025 ---028 ---030 ---032
CQH 017 --- 020 --- 023 --- 025 --- 028 --- 030
SBH / SLH 017 ---020 ---023 ---025 ---028 ---030 ---032
SQH 017 --- 020 --- 023 --- 025 --- 028 --- 030
16
BELT OR CHORD
BLOCKING PEG
(NOT SUPPLIED)
SPLIT PIN
(NOT SUPPLIED)
LIFTING TUBE
(NOT SUPPLIED)
(BASE HOLES Ø56)
"A"
(m)
1.8
"B" "C"
(m) (m)
' 5.0 ' 9.0