Mode Functions - Pepperl+Fuchs FUQ-B8 Manual

VB24

2.3.2 Mode Functions

Quick access to the following functions is provided by
an easy procedure using the push button:
1 – Press the button (the STATUS LED will give a
visual feedback).
2 – Hold the button until the specific function LED is
on (TEST, LEARN or SETUP).
3 – Release the button to enter the specific function.
Once button is pressed, the cycle of LEDs activation is as follows:
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
Release button to
Exit
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
Release button to
enter AutoSetup
Test Mode Function
Once entered, the Bar-Graph on the five LEDs is activated and if the scanner starts reading
barcodes the Bar-Graph shows the Good Read Rate. In case of no read condition, only the
STATUS LED is on and blinks.
To exit the Test Mode, press the Mode push button once.
22
READY
FOCUS
GOOD
TRIGGER
LEARN
COM
TEST
STATUS

Release button to
enter Test Mode
READY
FOCUS
GOOD
TRIGGER
COM
TEST
STATUS

Release button to
enter Focus Lock/Unlock
READY
GOOD
TRIGGER
COM
STATUS
READY
FOCUS
GOOD
SETUP
TRIGGER
COM
STATUS

Release button to
enter AutoLearn
READY
FOCUS
GOOD
SETUP
TRIGGER
LEARN
COM
STATUS

Release button to
Exit
FOCUS
SETUP
LEARN
TEST
FOCUS
SETUP
LEARN
TEST

FOCUS
SETUP
LEARN
TEST
 (cycle)