Installation Guide
2.9 LED Indicators
Both Integrated Antenna and External Antenna models have LED activity indicators on the front of the case. With
the External Antenna models mounted above a ceiling, LEDs are at the center of an oval badge on the ceiling; a
light pipe enables viewing the back LEDs through the ceiling tile.
The LEDs provide a status display indicating error conditions, transmission, and network activity for the 5 GHz
802.11a/n (amber) radio or the 2.4 GHz 802.11b/g/n (green) radio.
Task
System Booting
Radio Shutdown
Administratively
or
LEDs Disabled
Radio Not Configured
or
Country-code not set
or
WLAN not mapped to
radio
Locate AP Mode
5 GHz Activity LED (Amber)
Solid On (During start up only)
Off
Blink (On 2 seconds, Off 2 seconds) Blink (On 2 seconds, Off 2 seconds)
Off
2.4 GHz Activity LED (Green)
Solid On (During start up only)
Off
Blinking
17