Install The Software - Canon PIXMA MP530 Quick Start Manual

Hide thumbs Also See for PIXMA MP530:
Table of Contents

Advertisement

For information about the software installation on this page, also refer to the Easy Setup
Instructions.

Install the software

Select [Easy Install] in order to install the application software, On-screen Manual and MP drivers. Select
[Custom Install] in order to choose the options you would like to install.
IMPORTANT
• Temporarily close any open applications, including anti-virus software. Computer security programs
can be restarted after software installation.
Installing the MP Driver - Windows
• If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this
version before installing the new version. For instructions on uninstallation, refer to the guides for that
version of MultiPASS Suite.
• You must log on as an administrator or have administrative privileges in order to install the software in
Windows XP or Windows 2000.
• Do not switch users during the installation process.
• If the following screen appears, the USB cable is connected.
Perform the following steps.
1. Press [ON/OFF] to turn off the machine.
2. Disconnect the USB cable.
3. Click [Cancel].
Installing the MP Driver - Macintosh
• Do not connect the machine to Mac
supported.
• Enter the name and password for an Administrator Account if required.
Perform the following to make sure the driver has been installed correctly
1. Select [Applications] from the [Go] menu.
2. Double-click the [Utilities] folder, then the [Printer Setup Utility] ([Print Center] when using Mac OS
X v.10.2.x) icon.
If the printer is displayed in the [Printer List], the printer driver is installed.
If the printer is not displayed in the [Printer List], click [Add] in the [Printer List], select [MP530] from
the [Printer Name] list, and click [Add].
When connecting from Mac OS X v.10.3.3 or earlier:
Restarting the computer while connected to the machine may cause the machine not to be detected. To
resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back
ON again.
• [MP530 FAX] is shown in the [Printer Name] list, but you cannot add [MP530 FAX]. You can fax the
document with the current print settings applied to it using the computer's internal modem. You cannot
send faxes from your computer via the machine.
4
®
®
®
OS 9 or Mac OS X Classic environments since they are not

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents