Packet Re-Assembly Settings - D-Link NetDefend DFL-210 User Manual

13.23. Packet Re-assembly Settings

13.23. Packet Re-assembly Settings
Packet re-assembly collects IP fragments into complete IP datagrams and, for TCP, reorders seg-
ments so that they are processed in the correct order and also to keep track of potential segment
overlaps and to inform other sub-systems of such overlaps. The associated settings limit memory
used by the re-assembly sub-system.
Reassembly_MaxConnections
This setting specifies how many connections can use the re-assembly system at the same time. It is
expressed as a percentage of the total number of allowed connections. Minimum 1, Maximum 100.
Default: 80
Reassembly_MaxProcessingMem
This setting specifies how much memory that the re-assembly system can allocate to process pack-
ets. It is expressed as a percentage of the total memory available. Minimum 1, Maximum 100.
Default: 3
278
Chapter 13. Advanced Settings