Time Synchronization Settings - D-Link NetDefend DFL-210 User Manual

13.17. Time Synchronization Settings

13.17. Time Synchronization Settings
TimeSync_SyncInterval
Seconds between each resynchronization.
Default: 86400
TimeSync_MaxAdjust
Maximum time drift that a server is allowed to adjust.
Default: 3600
TimeSync_ServerType
Type of server for time synchronization, UDPTime or SNTP (Simple Network Time Protocol).
Default: SNTP
TimeSync_GroupIntervalSize
Interval according to which server responses will be grouped.
Default: 10
TimeSync_TimeServerIP1
DNS hostname or IP Address of Timeserver 1.
Default: none
TimeSync_TimeServerIP2
DNS hostname or IP Address of Timeserver 2.
Default: none
TimeSync_TimeServerIP3
DNS hostname or IP Address of Timeserver 3.
Default: none
TimeSync_TimeZoneOffs
Time zone offset in minutes.
Default: 0
TimeSync_DSTEnabled
Perform DST adjustment according to DSTOffs/DSTStartDate/DSTEndDate.
Default: OFF
TimeSync_DSTOffs
271
Chapter 13. Advanced Settings